Take a wet towel with a little dab of dish soap on it, and clean your golf club grip. Rinse with a clean wet cloth. Dry your club and club grip with a new clean dry cloth. Optionally, you can use some chrome polish or metal polish to polish the golf club shaft and face to help protect against rust.
How do I make my golf clubs look brand new?
Apply any metal polish or car wheel polish to the golf clubs. Most polishes can be applied with a soft cloth or towel. Let them sit for a minute, then wipe the polish from the clubs. Spray polishes are also available.
How do you make old golf clubs look new?
Soap and Water
This can be a good place to start for most clubs. With a simple mixture of soap and water, you do not need to worry about damaging the club. After a brief soak, use a small brush like a toothbrush to try and remove any rust. This works best if the rust buildup is not extreme.
How do you clean tarnished golf clubs?
Fill a bucket with warm (not hot) water mixed with dish washing liquid or liquid soap. Soak the clubs for 5 minutes or so and then wipe them with a cloth. If the rust is purely on the surface, this may be sufficient to remove it and will not cause any damage to your clubs.
Is it OK to wax golf clubs?
Any rust spots can be gently removed using fine grade steel wool. The steel wool should be at least 000, but preferably 0000, since anything more abrasive will scratch the shaft. Chrome polish or car wax can be applied after cleaning for extra care, but is not mandatory.
How do I black out my golf clubs?
To do it yourself, get your hands on a paint stripper like acetone (nail polish remover works, too). Then apply acrylic paint, or even nail polish, to achieve the color scheme you desire. Or, after you strip the paint off your club, you have the option to leave it that way for a stealthy, unfinished look.
How do you remove ball marks from irons?
In removing scuff marks, all you need to have is a white magic eraser and then rub it against your golf irons. This should solve your problem, and you’ll say goodbye to those scuff marks in no time.
Can you sand your golf clubs?
Storing your clubs in a damp area only makes things worse, as does a hot trunk. You can actually bake the rubber and cause damage that way, too. A grip before (L) and after (R) the sandpaper process. … The takeaway: Lightly sanding your grips works, but only in the short term.
Can you restore old clubs?
You don’t have to give up on those old clubs though, because you can easily remove the rust and restore them to great condition fairly easily. Prepare your clubs for restoration by wiping them down with a damp cotton cloth. … Use a piece of steel wool to begin removing the rust from your golf clubs.
How do you clean and restore a golf club?
Mix warm water and 2 teaspoons of dishwashing liquid or soap into a bowl or a bucket (depending on how many clubs you need to clean). Dip your soft-bristle brush or toothbrush into the mixture and carefully scrub your club head, making sure that it doesn’t get too wet.
Can you use wd40 to clean golf clubs?
You can use WD-40 on golf clubs. It can be an effective way to remove rust and dirt from the head and shaft. It can also be used to remove the grip, acting as a solvent when you are applying a new one. Learning how to keep your golf clubs clean is vital.
Can you use steel wool on golf clubs?
Cleaning golf clubs is an easy job with S.O.S® steel wool soap pads. The soap is built right in, so all you need to do is wet the pad, rub, and rinse. You’re left with shiny club heads and clean grips in no time! Reusable, versatile and with incredible scrubbing power.
Can you refinish golf irons?
Refinishing old golf clubs can be a rewarding process. … Whether you want a new look on your putter head or a different flex on your shaft, refinishing clubs at home is a great way to try out new technology. Refinishing clubs is a do-it-yourself project and should be approached with ample time and proper materials.