Graphite shafts need special care to be cut properly. … It can cut through a graphite shaft in 15-20 seconds after the shaft has been securely place in your vise.
How do you shorten graphite clubs?
Remove the existing grip. With steel shafts, use a tubing cutter to trim the shaft; with graphite shafts, shorten using a hacksaw. Re-install a grip on the newly shortened shaft. And, most importantly, Wishon says, add weight to the clubhead in some manner to restore the swingweight feel of the club.
Can a golf club shaft be shortened?
Shortening the shaft can make the golf club less flexible. … Taking 2 inches off will change the flex of the club. If you are shortening irons, every 1 inch you shorten the club will make the iron effectively play 2 degrees flatter. You may need to have the lie angles readjusted after shortening them.
How do you cut graphite?
Most people like to use a hack saw with a blade that can cut graphite. Many golf club part manufacturers will sell blades like this, and they are usually easy to install on your current hack saw. A typical hack saw blade is probably not going to do the trick. Many people also use a Dremel-type tool.
Is it OK to shorten a driver shaft?
Shortening the shaft will make the club shorter but it will also make the shaft stiffer and adjust the swing weight as well. Plus, the more length you remove, the less flex your club will have. Depending on how much you cut it down, it could move a regular flex to a stiff or a stiff to an extra stiff.
What happens if driver shaft is too long?
“Longer driver shafts can create more clubhead speed, resulting in additional ball speed and overall distance gains,” says Custom Lab Golf founder Gavin Hay. “That’s why manufacturers have continually increased their standard spec driver shaft lengths over the years.
How much does it cost to shorten a driver shaft?
Generally, this fee will be about $15 to $35 depending on where and when you get the work done. Replacing a shaft on a driver is a bit more work than regripping a club. Try to have it done by a reputable person who understands club fitting.
Can I cut my irons to one length?
Every ONE Length iron has been re-engineered to match 7-iron head weight, therefore, any custom shaft (cut to 7-iron length) can work with any of the ONE Length heads. … Because the long irons have a shorter shaft, we have to add weight to the clubhead to make it heavier.
Does shortening a golf shaft make it stiffer?
A shorter shaft is typically stiffer than a longer one. This enables them to keep the same length club but have a slightly stiffer shaft near the ball. … Cutting a club from the butt end will have somewhat the opposite effect, making the shaft stiffer overall but shorter as well.
Which end of a golf shaft do you cut?
The butt end of the shaft is grip end. If you are shortening or extending the length of a golf club, this is where you will cut. If you want to change the play-ability of the club (feel, flex to a certain extent, spin rate, dispersion), you will be cutting the tip end of the shaft.
Do pro golfers use shorter drivers?
On the PGA Tour, the average driver length is 44.5 inches. That’s shorter than the standard 45-46 inches. Most professional golfers are aware of the benefits that shortening their driver shaft, at least a little, can give them.
How do I shorten my golf clubs?
If you have purchased a set of used golf clubs that are too long, you can quickly cut them down to size with a hand-held rotary tool. You can also resize your old clubs and pass them on to your children. The shaft of a golf club is narrower at the head end to generate power on the swing.